Selective Pd Separation from Simulated Radioactive Liquid Waste by Precipitation Using Xenon Lamp Irradiation for a Simplified Procedure.

In this study, we developed a simple and one-step Pd separation technique based on photoreduction with Xe lamp irradiation for the determination of 107Pd in highly radioactive samples. A simulated high-level radioactive liquid wastes (HLLW) solution, consisting of 14 major elements in a 3 mol L-1 HNO3 solution, was used to evaluate the separation performance. The Pd precipitate was formed by Xe lamp irradiation, and recovered by centrifugation. The Pd recovery from the simulated HLLW solution reached up to 50%, while 99.5% of the other 13 elements was separated. These results indicate that the applicability of the proposed separation technique to HLLW samples.

Highly sensitive detection of sodium in aqueous solutions using laser-induced breakdown spectroscopy with liquid sheet jets.

Laser-induced breakdown spectroscopy (LIBS) combined with liquid jets was applied to the detection of trace sodium (Na) in aqueous solutions. The sensitivities of two types of liquid jets were compared: a liquid cylindrical jet with a diameter of 500 µm and a liquid sheet jet with a thickness of 20 µm. Compared with the cylindrical jet, the liquid sheet jet effectively reduced the splash from the laser-irradiated surface and produced long-lived luminous plasma. The limit of detection (LOD) of Na was determined to be 0.57 µg/L for the sheet jet and 10.5 µg/L for the cylindrical jet. The LOD obtained for the sheet jet was comparable to those obtained for commercially available inductively coupled plasma emission spectrometers.

Application of an Augmentation Method to MCR-ALS Analysis for XAFS and Raman Data Matrices in the Structural Change of Isopolymolybdates.

We measured X-ray absorption fine structure (XAFS) and Raman spectra of isopolymolybdates(VI) in highly concentrated HNO3 solution (0.15 - 4.0 M), which change their geometries depending on the acid concentration, and performed the simultaneous resolution of the XAFS and Raman data using a multivariate curve resolution by alternating least-squares (MCR-ALS) analysis. In iterative ALS optimization, initial data matrices were prepared by two different methods. For low sensitivity of the XAFS spectra to the geometrical change of the isopolymolybdates, the MCR-ALS result of single XAFS data matrix shows a large dependence on the preparation method of the initial data matrices. This problem is improved by the simultaneous resolution of the XAFS and Raman data: the MCR-ALS result of an augmented matrix of these data has little dependence on the initial data matrices. This indicates that the augmentation method effectively improves the rotation ambiguities in the MCR-ALS analysis of the XAFS data.

Determination of 107Pd in Pd purified by selective precipitation from spent nuclear fuel by laser ablation ICP-MS.

Determination of radiopalladium 107Pd is required to ensure radiation safety of the Pd extracted from spent nuclear fuel for recycling or disposal. We employed nanosecond laser ablation inductively coupled plasma quadrupole mass spectrometry (ns-LA-ICP-QMS) to simplify the analytical procedure of 107Pd. Pd was separated through a selective Pd precipitation reaction induced by pulsed laser irradiation that reduces Pd(II) ions to metal Pd(0). Laser ablation facilitates direct measurement of the Pd precipitates, skipping the dissolution and dilution procedure with aqua regia and HCl, which causes serious corrosion damage to the introduction system of the ICP. In the present study, 102Pd in natural Pd standard solution was used as an internal standard owing to its absence in spent nuclear fuel. Pd precipitates with diameters ranging from 0.2 to 0.5 µm, obtained by pulsed laser irradiation, were embedded uniformly on the surface of the centrifugal filter to form a microscopically thin and flat Pd surface. The resulting homogeneous Pd layer is suitable for obtaining a stable signal ratio of 107Pd/102Pd (< 4%, 2RSD). The mass bias-corrected ratio of 107Pd/102Pd and the amount of 107Pd were 0.163 ± 0.004 and 17.8 ± 0.6 ng, respectively, which correspond to the values obtained by solution nebulization measurement after the dissolution of identical Pd precipitates. Graphical abstract ᅟ.

Hydration Structures of the Human Protein Kinase CK2α Clarified by Joint Neutron and X-ray Crystallography.

Casein kinase 2 (CK2) has broad phosphorylation activity against various regulatory proteins, which are important survival factors in eukaryotic cells. To clarify the hydration structure and catalytic mechanism of CK2, we determined the crystal structure of the alpha subunit of human CK2 containing hydrogen and deuterium atoms using joint neutron (1.9 Šresolution) and X-ray (1.1 Šresolution) crystallography. The analysis revealed the structure of conserved water molecules at the active site and a long potential hydrogen bonding network originating from the catalytic Asp156 that is well known to enhance the nucleophilicity of the substrate OH group to the γ-phospho group of ATP by proton elimination. His148 and Asp214 conserved in the protein kinase family are located in the middle of the network. The water molecule forming a hydrogen bond with Asp214 appears to be deformed. In addition, mutational analysis of His148 in CK2 showed significant reductions by 40%-75% in the catalytic efficiency with similar affinity for ATP. Likewise, remarkable reductions to less than 5% were shown by corresponding mutations on His131 in death-associated protein kinase 1, which belongs to a group different from that of CK2. These findings shed new light on the catalytic mechanism of protein kinases in which the hydrogen bond network through the C-terminal domain may assist the general base catalyst to extract a proton with a link to the bulk solvent via intermediates of a pair of residues.

Determination of 107Pd in Pd Recovered by Laser-Induced Photoreduction with Inductively Coupled Plasma Mass Spectrometry.

Safety evaluation of a radioactive waste repository requires credible activity estimates confirmed by actual measurements. A long-lived radionuclide, 107Pd, which can be found in radioactive wastes, is one of the difficult-to-measure nuclides and results in a deficit in experimentally determined contents. In this study, a precipitation-based separation method has been developed for the determination of 107Pd with inductively coupled plasma mass spectrometry. The photoreduction induced by pulsed laser irradiation at 355 nm provides short-time and one-step recovery of Pd. The proposed method was verified by applying it to a spent nuclear fuel sample. To recover Pd efficiently, a natural Pd standard was employed as the Pd carrier. Taking advantage of the absence of 102Pd in spent nuclear fuel, 102Pd in the Pd carrier was utilized as the internal standard. The chemical yield of Pd was about 90% with virtually no impurities, allowing accurate quantification of 107Pd. The amount of 107Pd in the Pd precipitate was 17.3 ± 0.7 ng, equivalent to 239 ± 9 ng per mg of 238U in the sample.

Effect of liquid-sheet thickness on detection sensitivity for laser-induced breakdown spectroscopy of aqueous solution.

For aqueous-solution-based elemental analysis, we used a thin liquid sheet (µm-scale thickness) in laser-induced breakdown spectroscopy with nanosecond laser pulses. Laser-induced plasma is emitted by focusing a pulsed Nd:YAG laser (1064 nm) on a 5- to 80-µm-thick liquid sheet in air. To optimize the conditions for detecting elements, we studied how the signal-to-background ratio (SBR) for Hα Balmer and Na-neutral emission lines depends on the liquid-sheet thickness. The SBR of the Hα Balmer and Na-neutral lines was maximized for a sheet thickness of ~20 µm at the laser energy of 100 mJ. The hydrodynamics of liquid flow induced by the laser pulse was analyzed by laser flash shadowgraph imaging. Time-resolved observation of the hydrodynamics and plasma emission suggests that the dependence of the SBR on the liquid-sheet thickness is correlated with the volume of flowing liquid that interacts with the laser pulses.

Structural study on 2,2'-(methylimino)bis(N,N-dioctylacetamide) complex with Re(VII)O4- and Tc(VII)O4- by 1H NMR, EXAFS, and IR spectroscopy.

The structures of the complex of 2,2'-(methylimino)bis(N,N-dioctylacetamide) (MIDOA) with M(VII)O(4)(-) (M = Re and Tc), which were prepared by liquid-liquid solvent extraction, were investigated by using (1)H nuclear magnetic resonance (NMR), extended X-ray absorption fine structure (EXAFS), and infrared (IR) spectroscopy. The (1)H NMR spectra of the complex of MIDOA with Re(VII)O(4)(-) prepared in the organic solution suggest the transfer of a proton from aqueous to organic solution and the formation of the H(+)MIDOA ion. The EXAFS spectra of the complexes of H(+)MIDOA with Re(VII)O(4)(-) and Tc(VII)O(4)(-) show only the M-O coordination of the aquo complexes, suggesting that the chemical state of M(VII)O(4)(-) was unchanged during the extraction process. The results from (1)H NMR and EXAFS, therefore, provide evidence of M(VII)O(4)(-)···H(+)MIDOA complex formation in the organic solution. The IR spectra of Re(VII)O(4)(-)···H(+)MIDOA and Tc(VII)O(4)(-)···H(+)MIDOA were analyzed based on the structures and the IR spectra that were calculated at the B3LYP/cc-pVDZ level. Comparison of the observed and calculated IR spectra demonstrates that an intramolecular hydrogen bond is formed in H(+)MIDOA, and the M(VII)O(4)(-) ion interacts with H(+)MIDOA through multiple C-H(n)···O hydrogen bonds.

Structural evolution of (1-NpOH)(n) clusters studied by R2PI and IR dip spectroscopies.

A large-size 1-naphthol cluster, (1-NpOH)(n), with n ≤ 30 was prepared by using a high-pressure pulsed valve. The electronic and vibrational transitions of (1-NpOH)(n) with n = 3-9 were measured by resonant two-photon ionization (R2PI) and ion-detected IR dip spectroscopies. The S(1) ← S(0) R2PI spectrum shows partially resolved structures around the origin band in the (1-NpOH)(n) cluster with n = 3-8. The (1-NpOH)(3) and the (1-NpOH)(6) clusters show relatively sharp origin bands. The structure of (1-NpOH)(3) was determined by comparison of the IR dip spectrum with the simulated one by DFT calculation, while those of (1-NpOH)(n) (n ≥ 4) were discussed in terms of topological geometries of a hydrogen-bonded network. Those analyses suggest that (i) the (1-NpOH)(3) cluster has the cyclic structure where three 1-NpOH monomers are linked by both the hydrogen-bonding and the π···C-H interaction between naphthyl rings and (ii) the (1-NpOH)(n) cluster with n ≥ 4 is built up by attaching the 1-NpOH monomers to the (1-NpOH)(3) core.

Isotopically selective infrared multiphoton dissociation of 2,3-dihydropyran.

Oxygen isotopic selectivity on infrared multiphoton dissociation of 2,3-dihydropyran has been studied by the examination of the effects of excitation frequency, laser fluence, and gas pressure on the dissociation probability of 2,3-dihydropyran and isotopic composition of products. Oxygen-18 was enriched in a dissociation product: 2-propenal. The enrichment factor of 18O and the dissociation probability were measured at a laser frequency between 1033.5 and 1057.3 cm-1, the laser fluence of 2.2-2.3 J/cm2, and the 2,3-dihydropyran pressure of 0.27 kPa. The dissociation probability decreases as the laser frequency being detuned from the absorption peak of 2,3-dihydropyran around 1081 cm-1. On the other hand, the enrichment factor increases with detuning the frequency. The enrichment factor of 18O increases with increasing the 2,3-dihydropyran pressure at the laser fluence of 2.7 J/cm2 or less and the laser frequency of 1033.5 cm-1, whereas the yield of 2-propenal decreases with increasing the pressure. A very high enrichment factor of 751 was obtained by the irradiation of 0.53 kPa of 2,3-dihydropyran at 2.1 J/cm2. Collisional effect of vibrationally excited molecules with ambient molecules on isotopic selectivity is discussed on the basis of a rate equation model including a collisional vibrational de-excitation process.

Structure of the jet-cooled 1-naphthol dimer studied by IR dip spectroscopy: cooperation between the pi-pi interaction and the hydrogen bonding.

The structure of a jet-cooled 1-naphthol (1-NpOH) dimer was investigated by using resonant-enhanced two-photon ionization (R2PI) and ion-detected infrared (IR) dip spectroscopy. A geometrical optimization and a frequency calculation in (1-NpOH)2 were also performed at the MP2/cc-pVDZ level. Stable isomers in the MP2/cc-pVDZ calculation were classified into a structure dominated only by the pi-pi interaction and structures formed by cooperation between the pi-pi interaction and hydrogen bonding. On the basis of a comparison between the observed and calculated IR spectra, the geometry of (1-NpOH)2 was concluded to be a pi-pi stacking structure supported by hydrogen bonding.

Theoretical Study on the Structure and the Frequency of Isomers of the Naphthalene Dimer.

The structures of the naphthalene monomer and dimer were investigated with performing vibrational analysis. The MP2 optimization showed that the naphthalene monomer has a nonplanar geometry in the 6-31G, 6-31G*, 6-31+G*, and 6-311G basis sets, while it has a planar geometry in the 6-31G*(0.25) and Dunning's correlation consistent basis sets. The MP2/cc-pVDZ calculation showed the presence of the four stable isomers, which were part of the isomers in the previous MP2/6-31G* calculation (Walsh, T. R. Chem. Phys. Lett. 2002, 363, 45). The presence of extra structures in the MP2/6-31G* calculation is attributed to a poor description of the potential energy surface, which is evident from the nonplanar structure of the monomer in the MP2/6-31G* calculation. The relative stability among the isomers in the MP2/cc-pVDZ calculation without counterpoise correction was maintained in both the single-point calculation at the MP2/aug-cc-pVDZ//MP2/cc-pVDZ level and the counterpoise-corrected optimization at the MP2/cc-pVDZ level. The relative stability among the isomers suggested an enhancement of the π-π interaction in the structure with lower symmetry, which could be explained using a molecular-orbital model. The vibrational analysis in MP2/cc-pVDZ without the counterpoise correction suggested that the isomers of the naphthalene dimer were distinguishable by the observation of the infrared spectrum in the low-frequency region (150-600 cm(-)(1)).

A new, highly sensitive time-of-flight mass spectrometer consisting of a flangeon-type conical ion lens system and a proto-type Daly detector for exhaust gas analysis based on the Jet-REMPI technique.

For the analysis of trace amounts of hazardous organic compounds, we developed a new ion detection system for supersonic jet resonance-enhanced multiphoton laser ionization mass spectrometry. High sensitivity and selectivity have been achieved by combining a proto-type Daly detector, a newly designed conical ion lens, and a potential switch that can perform the function of a mass selector. This ion detection system enables us to bring the jet nozzle closer to the ionization point. The detection sensitivity has thus been improved totally by more than 100 times compared with that obtained by the parallel-plate electrodes and micro-channel plate. We succeeded in assembling a flangeon-type ion extraction electrode consisting of a conical ion lens and a potential switch.